Vibration table suitable for automotive components, electronic components, components, medicine, food, furniture, gifts, ceramics, packaging and other industries laboratory and production line on the samples of the relevant vibration test. Such as environmental acceptance test, quality identification test, reliability test, endurance test, vibration simulation analysis, material characteristic test, fatigue test, vibration prevention improvement, etc.. Simulation of products in the manufacturing, assembly, transport and use of the process The vibration suffered, to assess its structural vibration resistance, reliability and integrity。型號 ModelF/ZW-TF(X & Y)F/ZD-TF(XY)F/ZW-TF(XYZ)電源 power supplyAC 2200V 50HZ  性能參數頻率范圍 Frequency range1HZ~600HZ位移/振幅Position Shift amplitude0~5mm加速度Acceleration10g約（100m/s2）20g（200m/s2）振動方向Vibration direction垂直 水平 前后 （X+Y+Z）振動波形Vibration waveform全波/半波full wave /Half wave時間控制Time control任何時間可設（單位秒）Any time can be set (unit seconds)精密度Precision degree頻率可顯示到0.01HZ,J精密度0.1HZ  Frequency can be displayed J, 0.01HZ precision 0.1HZ     設備特點調頻功能Adjust frequency function1-600HZ范圍內可任意設定試驗頻率1-600HZ   range can be arbitrarily set test frequency可程式功能Programmable function1-600HZ頻率范圍內可將不同的固定頻率計時分段編程試驗（共15段）1-600HZ   frequency range can be segmented programming test (a total of 15 sections) 掃頻功能Sweep frequency function1-600HZ頻率范圍可任意設定上限頻率，下限頻率及周期時間，進行循環掃頻試驗1-600HZ   frequency range can be arbitrarily set the upper limit frequency, lower limit   frequency and cycle time, cyclic sweep frequency test倍頻功能Frequency doubling function1-600HZ頻率范圍內可任意設定從低頻到高頻，頻率可自動成倍進行循環1-600HZ   frequency range can be arbitrarily set from low frequency to high frequency,   frequency can be automatic cycle 對數功能Logarithm function1-600HZ頻率范圍內從低頻到高頻或從高頻到低頻，頻率成對數的形式循環試驗1-600HZ   frequency range from low frequency to high frequency or from high frequency   to low frequency, frequency into the form of a logarithmic cycle test

跌落試驗機分為單臂跌落試驗機，雙臂跌落試驗機。專用于測試產品包裝受到墜落之受損情況，及評估運輸搬運過程時耐沖擊強度。采用雙柱導向、高度跌落次數可置，工作穩定可靠，可實現棱、面、角跌落，滿足GB/T4857.5-92、ISO2248-1972E。本機采用光電控制，可設定七檔跌落高度，也可自由選擇跌落高度，跌落釋放采用電磁控制，能使試樣瞬間自由落下，對包裝容器進行之棱、角、平面進行跌落沖擊試驗。采用國際標準150 2248 一1985 《 包裝― 完整、滿裝的運輸包裝件垂直沖擊跌落試驗》 　　引用：GB / T 4857 . 1 包裝運輸包裝件各部位的標示方法 GB / T4857 . 2 包裝運輸包裝件溫濕度調節處理 GB / T 4857 . 17 包裝運輸包裝件編制性能試驗大綱的一般原理 GB 4857 . 18 包裝運輸包裝件編制性能試驗大綱的定量數據